Hot Foil Coder
Read More5 / 11
LabelOn™ Mini Hot Foil Coder
The HOT FOIL CODER on the LabelOn™ Mini Series DOES NOT require an Air Supply
Other Details (which should help you in your label design):
You can have up to 3 lines of type
Each Line is 4.5mm Apart
Type Character Height can be either 2mm or 3mm
If type is 2.0mm then gap between lines will be 2.5mm
If type is 3.0mm then gap between lines will be 1.5mm
line width : 30mm wide ribbon
Maximum of 14 characters per line
Type Set included is:
EXP / MFG / LOT x 2 pcs
0. – 9. x 5 pcs ; 0 – 9 x 5 pcs
NOTE: Ribbon needs to have Maximum OD of 65mm which is about 100M (300Ft)
Core ID is 25mm (1")
Share URL: https://goo.gl/mROHRm
- No Comments