Vacuum Wrap

LabelOn™ Vacuum Wrap - Labels Completely Dispensed Before Application

This video is to show you how label(s) can be fully dispensed from the roll before they come into contact with the bottle/can. This helps provide the very good alignment of the leading and trailing edges of the label. A vacuum wrap with a standard backing plate is recommended for label wraps of up to 95%. If you have longer labels then the use of a Vacuum Wrap or a Standard Wrap with a Bottle Capture Device is recommended.
Vacuum Wraps are also highly recommended when labeling Tapered Containers where the label is best completely released from the label roll before it is wrapped onto the container.
This is because the height of the top edge of the label will vary on the label roll but will not vary in height when applied on the container to be labeled. Completely releasing the label before it wraps onto a tapered container avoids the roll of labels having its tracking through the label head affected by the label wrap on process.

Share URL: https://goo.gl/DWlgPJ